Tel: 00353 402 32116

Product Detail

< Back

Line Marking Paint 41015011 White*
Supplier Code: 18MM561
Ex VAT €7.78 EACH

Line Marking Paint 41015011 Durable Line Marking Paint - 500g
Dy-Mark’s Line Marking Paint is a fast drying acrylic paint, specially formulated to provide long lasting lines. Line Marking Paint is designed for use with the Dy-Mark Line Master and ideal for marking on car parks, factories, warehouses, sporting fields and courts.
A fast drying acrylic paint, designed for use with the Dy-Mark Line Master
Specially formulated to provide long lasting lines
Ideal for marking out car parks, factories, warehouses, sporting fields and courts
Toluene-free formula
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Insert can into the Line Marking Machine’s Spot Marking Handle. To achieve the narrowest line width, the spot marking handle must be inserted into the lowest position. Line width can be increased by raising handle in slot. Line width ranges between approx. 60mm and 100mm. Test line width by marking on cardboard until desired width is achieved. Masking wheels are designed to sharpen lines by catching any overspray at the edges only.
TECHNICAL DATA
Size: 500g Aerosol
Finish: Matt
Colour: 8 Standard Colours
Consistency: Liquid
Coverage: 80 – 100 metres of line per aerosol can (depending on line width)
Suitable Surfaces: Concrete, bitumen, grass, soil, timber
Drying Time: 10 minutes at 25°C
Ideal Application Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.
Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
* Slip resistance required
* Surface type
* Volume of traffic
* Potential exposure to any surface contaminants e.g. water, solvents or chemicals KEEP AWAY FROM CHILDREN

         

 









Follow us